Using the latest generation Cree LEDs, with almost 3000 lumens of light, you will be seen!

Our tail light fits the same 1.75" mounting holes as a conventional xenon strobe, and the base is shaped to match the fiberglass profile of a Van's RV tail. This unit will operate on 12 volt systems only.

It is a combined position and strobe light, with separate position/nav and strobe power inputs.

Pre-programmed with a selection of 8 flash patterns, easily selected by a push-button. It is also fitted with a reed switch, so by holding a magnet near the unit, you can change the pattern without having to remove the light from the tail.

And just because we could, this unit is also capable of blinking out messages in Morse code, which makes your strobe pattern that much more random and eye catching! We will customize it for you with extra patterns such as "RV-10", "N12345", and any other message you'd like. "Go Tigers!" "Hi Mom!" Your kids names? Easy!
We've had several customers tell us that the tower controller has read back their tail message, so it does work!

This is a made-by-us item, and not a kit of parts. It's ready to go out of the box. Being a hand-made item, the solid cast-resin dome may have some suspended air bubbles, but they do not materially affect the light output. When it's turned on, it's too bright to look at!

We offer a one year replacement warranty on this product.

Supplied with a mounting bracket (bronze colored item in the pictures above) which is designed to be bonded to the inside of the fiberglass tail fairing. This makes for a sturdy foundation for the strobe to be screwed into. Just add some thread locker on installation and you're set.

Only 58g/2oz weight.

Check the pictures and information sheet for more... information!

Optional:
We now have a mounting bracket that can be riveted to the exterior of the rudder fairing. Clear anodized aluminium, supplied with four CS4-4 rivets. Tapped with M3 threads to suit Flyleds tail lights.